Shower Installation Made Simple - A Complete Guide For New Units

Schedule Now



Have you been looking for know-how around Simple ways to Install a Shower Cubicle on Your Own?


How to Install a One-Piece Shower Unit
An effective shower installation calls for careful preparation and a great deal of work. Most of the times, you will need to do 3 types of jobs: framing walls, mounting the plumbing, as well as ending up walls.

Prep work


First of all, you have to choose the type of shower that you want to install. It is important to ascertain whether the selected shower is capable of handling certain systems and can control a secure level of water via the boiler. A lot of shower devices nowadays are designed to be flexible to various water pressures (such as kept warm water and chilly keys).
It is also vital to consider the water pressure as well as the preparation of the piping and drain for the shower

Various Sorts Of Shower Units


  • Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower device can be connected to the bath faucet based on your requirement, and also the water temperature can be changed by means of the faucets. Push-on mixers are cheap and incredibly basic to mount. However, although the tube connection is straightforward, it is conveniently displaced. In addition, it is inconvenient to adjust the temperature.

  • Bath/Shower Mixer: The pipe and also spray of this sort of shower are combined with a bath mixer tap, as well as the temperature level can be adjusted with the bathroom faucets. It is a really economical option and no extra plumbing is included. Nevertheless, the bath/shower mixers also deal with bothersome temperature level control alternatives.

  • Guidebook Mixer: The tube and also spray of a hand-operated mixer shower unit belong of the wall surface system as well as the cold and hot water products are connected to a single valve The temperature and pressure of the water are regulated via either one or a selection of handles (in much more expensive showers). Although temperature control is a lot easier in hands-on mixer kinds, they are more expensive than the previously stated mixers. They likewise need additional plumbing of cold and hot water system pipes.

  • Thermostatic Mixer: The hose and also spray of this shower kind are a part of the wall surface system as well as the hot and cold water products are linked to a single shutoff right here also. It is total with a built-in stabiliser to self-adjust the water temperature level as well as to prevent it from coming to be as well hot. Among the greatest advantages of a thermostatic mixer shower kind includes convenient temperature control. However, it is one of the most expensive of the different mixer alternatives.

  • Power Shower: A power shower is a solitary unit containing an effective electrical pump that is capable of changing both the water pressure as well as temperature. This type of shower can be fitted if there is supply of water from a cold water cistern and also a warm water cyndrical tube. A power shower makes the modification of both pressure and temperature level easy. On the other hand, it is unsuitable for water warmed straight by the shower or where the water is supplied by a combination boiler under keys stress.

  • Electric Shower: An electric shower is plumbed into a keys cold water supply and also it heats the water electrically. It is necessary to keep in mind that for this shower type to be installed, the keys stress needs to be at least 0.7 kg/sq centimeters (10lb/sq in). The system allows the temperature and also pressure to be readjusted by means of a knob. Versions with temperature level stabilisers are better as they remain untouched by other taps in other places being used within the household. A major drawback of electrical showers is that the control knob just enables the option of heats at less stress, or reduced temperatures at a better pressure. This is troublesome in the winter when the spray is commonly weak and the keys water is chillier. Nonetheless, this issue is tackled in some designs which are readily available with a winter/summer setup.


  • Method


    Depending upon the kind of shower you wish to set up, the shower head must either be suited order to avoid its contact with the water in the bathroom below or the base tray, or it needs to have a check valve.
    Prior to starting, it is recommended to note the positions of the shower head as well as control, and to prepare the pipe-work involved. Furthermore, the water drainage system to eliminate the drainage will require to be planned. Both settings of the cable route as well as the shower button will likewise need to be thought about if a rapid or electric shower device is being installed.
    Utilize the guideline guide provided with the shower unit to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is essential to remove the water supply. In order to safeguard the pipelines, they need to be given a water resistant covering and additionally fitted with isolating valves. The pipelines can after that be buried into the wall surface and also plastered over to neaten the overall look.
    Fit the base tray, shower head, and also installations.
    Attach the primary shower control to the pipelines that will certainly be providing the water (This might require a female screw string adapter).
    Reconnect the water and test the pipelines for any type of leakages, as some might require tightening.
    If you are setting up an electric shower, remember to switch off the power supply prior to making any electrical connections. When these links have been made (there ought to be support within the user's manual), the power supply can be changed back on.

    Changing Water Pressure to Fit Your Shower


    The cold water tank can be lifted to a greater height (sometimes as low as 150mm (6inches)) by installation a strong wooden support beneath it - possibly made up of struts as well as blockboards. If you select this option, the main and circulation pipelines will also need to be elevated to satisfy the new height of the reservoir.
    Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is selected, it should be attached right into the power supply in order to operate.

    Piping and Drain


    It is best to utilize 15mm diameter supply pipelines, and also make the runs to the shower as short and straight as feasible so regarding maintain maximum stress as well as minimise heat loss. In addition, by reducing using elbows for pipeline edges, you can decrease the resistance in the circulation of the water. You can achieve this by flexing the pipes instead.

    Many Common Blunders


  • Going against or neglecting regional code limitations.

  • Using pipelines that are as well little.

  • Attaching copper to galvanized without making use of a brass or dielectric suitable in between the two.

  • Not using tape or pipeline substance at threaded joints.

  • Not leveling your fixtures when installing them.

  • Not installing an air void loading for components.

  • Cutting supply stub outs too brief to set up the shutoff valves onto after the finished wall surface remains in place.

  • Not properly straightening tubing into installations or stop valves. (Compeling the nut onto the compression ring at an angle when the tubing is at an angle will certainly trigger a leakage.).

  • When transforming the water back on in your home, constantly run the outside hose shutoff or flush your toilets to hemorrhage dirt and also air from the lines. This debris can cause troubles in your sink faucets and also various other plumbing trim.



  • Shower enclosures for bathrooms


    It makes your bathroom look like a luxury suite:


    Installing a new shower cubicle in your bathroom is an excellent way to make it look like a luxury suite. Nothing says modern elegance like a glass shower enclosure. Made with 8 mm easy clean glass, Jauqar shower enclosures come in varied colors and sizes to fit perfectly with your existing bathroom size & decor. The high-quality enclosures come with concealed fixings and silent cushion closing to ensure a great showering experience.


    Adds style to your bathroom:


    Shower cubicles are one of those shower products that can make your bathroom look modern, wide, and visually appealing. Jaquar shower enclosures are available in various styles, so you can find the one that fits your bathroom's overall design. Whether you prefer rectangular enclosures or fancy curved designs, Jaquar has it all.


    Enhances Personal Hygiene:


    Waking up in the morning to a filthy, muddy bathroom can ruin your day. Jaquar shower enclosure helps keep your bathroom clean and hygienic. A shower enclosure helps keep the water inside and off your bathroom flooring. Allowing water to spill out on a hard surface can lead to mold, mildew, and build-up on the tiles and other flooring surfaces, which can be unhygienic and unattractive.



    As all Jaquar shower enclosures are built to conform to the highest safety standards, you can be rest assured that they are completely watertight. This means you won't have to worry about leakages damaging your bathroom floor or ceiling—or worse yet, creating mold and mildew.


    Elevates your shower experience:


    A great shower combines many factors - optimum water pressure, apt water temperature, and great aesthetics during and after the shower. After all, who loves to clean the dirty floor just after a relaxing shower? With Jaquar shower enclosures, you can improve your experience by keeping the water within a specific area, so there is no cleaning post your shower. Offering style and function, our shower enclosures make your everyday life easier.


    Space-effective:


    Shower enclosures give you more space without sacrificing style. It can be a challenge finding both in today's modern bathroom, but a Jaquar shower enclosure will provide you with both. Unlike big, bulky shower enclosures, Jaquar's shower enclosures come in standard sizes that are good enough to fit any space- from large bathrooms with walk-in closets to bathrooms that need extra storage space. You can also customize the size as per your preference.


    Ensures safety with impressive safety features:


    Jaquar shower enclosures are designed with the highest safety standards. They come in different sizes and designs, along with toughened safety glass, high-quality hinges, and locking mechanisms that help keep you safe from injury while allowing you to feel at ease when taking a relaxing shower. A secure enclosure means no chance of slipping on wet bathroom floors.

    https://www.jaquar.org.uk/blog/why-shower-enclosure-are-important


    How to Install a One-Piece Shower Unit

    I'm just very drawn to How to Install a One-Piece Shower Unit and I really hope you enjoyed reading our blog posting. So long as you appreciated our blog entry kindly be sure to pass it around. We value reading our article about How to Build a Shower Enclosure for Your DIY Bathroom.




    Book An Appointment


    Leave a Reply

    Your email address will not be published. Required fields are marked *